Available for PC monitoring and external display realizing real-time data checking and parameters setting. Charging Power and Current Limitation Function. User programmable for battery types, load control etc.
Accurately recognizing and tracking of multiple power point. PV short circuit / PV reverse polarity /Battery over voltage. Battery over discharge / Battery reverse polarity / Load overload protection. Added Features(than Tracer A):Blacklight LCD Display / Common Negative Ground / Support lithium Battery / More Safety Protection.
Step: Connect the system in the order of 1. PV array, and disconnect the system in the reverse order 3. Battery must be connected first!! Never connect the soalr panel array to the controller Without/Before a Battery.DO NOT connect any inverter/ wind/Alternator or Charger into the charge controller! If the remote temperature sensor is not connected to the controller, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation. The wire size is only for reference.
If there is a long distance between the PV array and the controller or between the controller and the battery, larger wires can be used to reduce the voltage drop and improve performance. How to program for Lithium Battery?Select lithium battery type or customize via PC (Accessories needed:RS485-150U cable), software download website: EPEVER official website or look for in the manual. The old software download from: EPever official website, iOS system: search Epever on APP store (but the old software can not chose the Lithium battery type, fit for lead-acid battery).
We understand the concerns and frustrations you might have, and will do our endeavor to resolve the issues. Please give us the opportunity to resolve any problem.
This item is in the category "Home, Furniture & DIY\DIY Materials\Electrical Supplies\Alternative Energy Supplies\Solar Power Supplies\Solar Charge Controller".solar-eu" and is located in this country: GB. This item can be shipped to United Kingdom.