Kit New Genuine

Genuine Tony Ray's Aero Model Minimoa Laser Cut Balsa Model Kit Aircraft UK


Genuine Tony Ray's Aero Model Minimoa Laser Cut Balsa Model Kit Aircraft UK
Genuine Tony Ray's Aero Model Minimoa Laser Cut Balsa Model Kit Aircraft UK
Genuine Tony Ray's Aero Model Minimoa Laser Cut Balsa Model Kit Aircraft UK
Genuine Tony Ray's Aero Model Minimoa Laser Cut Balsa Model Kit Aircraft UK
Genuine Tony Ray's Aero Model Minimoa Laser Cut Balsa Model Kit Aircraft UK
Genuine Tony Ray's Aero Model Minimoa Laser Cut Balsa Model Kit Aircraft UK

Genuine Tony Ray's Aero Model Minimoa Laser Cut Balsa Model Kit Aircraft UK   Genuine Tony Ray's Aero Model Minimoa Laser Cut Balsa Model Kit Aircraft UK

Please visit us at'ServoShop' for different deals and exclusive offers. Tony Ray's Aero Model Minimoa Laser Cut Model Kit Aircraft & Accessories UK.

Taking the model gliding world by storm. A near accurate scale model of the famous German Minimoa Glider. Ask a friend in your club? The Göppingen Gö 3 Minimoa is a single-seat sailplane produced in Germany.

It was designed by Martin Schempp and Wolf Hirth and was produced the year after their first glider, the Göppingen Gö 1. It first flew in 1935. The name is derived from the name Moazagotl given to lenticularis clouds caused by the foehn wind in Sudetenland. The name was used for one of Hirth's earlier gliders and since the Gö 3 was a smaller version, it was called'Mini' as a diminutive.

It established several records, including the world altitude record of 6,687 m (21,939 ft) in 1938 in a thunderstorm. Richard du Pont and Chet Decker flew Minimoas to win the US Championships in 1937 and 1938. It was made out of wood and fabric with cantilevered'gull' wings.

A B-version in 1938 had thinner wings with a modified section and the gull's kink in a different place. It was the first glider built to carry water-ballast in a tank behind the pilot. Only five Minimoas remain airworthy: two in Germany, one in Japan, one replica build in the Netherlands and the latest one to fly in the U.

One more is being prepared for flight in Bacchus Marsh Australia. A 1935 Minimoa is on display at the National Soaring Museum in Elmira, NY (USA). The only known Minimoa still in private ownership in the USA is a 1938 owned by Jerry Wenger in Powell, WY (USA). This model is Tony Ray's first larger outdoor model and builds in to a truly exquisite aircraft.

Laser cut balsa and plywood. Aerofoil section vertical and horizontal stabilisers.

Wing Span 56 in / 1422mm. Wing Area 13.7 sq dm. RC transmitter with at least 3 channels. 5g mini servos x 4.

Rated at 4 out 5 regard difficulty of build. Where 5 is very difficult and 1 is very easy.

This kit is a'4'/. Its worth reading the BLUE. Note - Downloadable instructions are available for this kit on the Minimoa webpage on ServoShop.

Alternatively, they are available via the Tony Ray Aero Model. The colour pics are step by step and easy to follow instructions. This is not a beginners model. Although some complete beginners have built it successfully we would not rate it as a beginners kit. We can include all the great fitting parts in the world in this kit but we cannot supply the skill to assemble them.

If you look at this model as a traditional style Model Plane kit with a very. Using the Laser Cutting accuracy many angles and fits are set by the pieces , you need not have complex measurements , just follow the instructions.

Much of the model can be constructed in your hand, using eye sight as a line for accuracy. Old PVA glues are NOT recommended as they can destroy the 100% accurate fit and make the model very difficult to construct. The parts are fragile and should be assembled'dry' and then using a thin glue or a super glue or laser cut kit glue wick the glue in. No need to pin or clamp. Note There are other postal services available.

Should you desire a tracked or signed service, they are available. Is a radio control specialist store based in Frodsham, Cheshire. Opened in 1987, Steve Webb Models has over 30 years of specialist experience in radio control. Pop down to our store at.

We are open Monday through Saturday from 9:30am until 5:30pm. Our website Servoshop is Open 24/7. Important Notice for Overseas Customers. Due to the costs of sending to Northern Ireland, Isle of Wight, IOM and the Channel Islands and certain areas of Scottish Highlands and Islands. The Highlands and Islands of Scotland - postcodes IV, HS, KA27-28, KW, PA20-49, PA60-78, PH17-26, PH30-44, PH49-50, ZE.

Northern Ireland, Isle of Man and Isles of Scilly -postcodes BT, IM, TR21-25. The item "Genuine Tony Ray's Aero Model Minimoa Laser Cut Balsa Model Kit Aircraft UK" is in sale since Tuesday, November 10, 2020.

This item is in the category "Toys & Games\Radio Control & RC Toys\RC Model Vehicles & Kits\Aeroplanes". The seller is "steve_webb_models" and is located in Frodsham, Cheshire.

This item can be shipped worldwide.
  1. Model: Minimoa Glider
  2. Modified Item: No
  3. Lot (Y/N): No
  4. Colour: see model
  5. Country/Region of Manufacture: China
  6. Custom Bundle: No
  7. Vintage (Y/N): No
  8. Material: Wood
  9. Type: Scale
  10. UK Stock: NO IMPORT DUTIES
  11. Required Assembly: Unassembled Kit
  12. MPN: TRMINIMOA
  13. Avoid: IMPORT TAXES - We are in the UK
  14. Age Level: 12-16 Years
  15. Fuel Type: Electric
  16. Brand: Tony Ray's Aero Model Co
  17. Replica of: Minimoa

Genuine Tony Ray's Aero Model Minimoa Laser Cut Balsa Model Kit Aircraft UK   Genuine Tony Ray's Aero Model Minimoa Laser Cut Balsa Model Kit Aircraft UK