Genuine Walbro 450 Lph High Performance Fuel Pump & Fitting Kit F90000267 E85

  

Sytec Motorsport Webcon UK NPS Mocal Lumenition LMA Omex Technology BC Suspension K-Spor t Brakes. Hardrace SuperPro GFB Go Fast Bits Racinglines Bachler Racing. Genuine Walbro-TI 450 LPH Competition In Tank Fuel Pump Kit. Complete With Filter Bag And Hardware As Pictured. 1 x 85mm Length Of High Pressure Fuel Hose.

2 x Stainless Steel Worm Hose Clamps. 1 x Delphi Open Ended Wire Harness. 1 x Fuel Filter And Retaining Clip. Designed for engines up to around 800bhp on 12 volts, 1000bhp on 13.5 volts. ECU Pulse Width Modulation Compatible.

OEM technology designed and developed for E85. All pumping components have been validated to OEM Specifications for approved use in E85/Flex fuel applications.

Out Performs The Bosch 044 Fuel Pump And Half The Size And Weight. Fittings In (mm):- 11.

Fittings Out (mm):- 9. Pump:- Walbro TI Automotive GST450. Flow Ltr/Hr (Max):- 516. Max Pressure (Bar):- 8.3.

Diameter (mm):- 50 / 39. The Walbro GST450K is now the best in tank fuel pump on the market today. Whilst exceeding the Bosch 044 fuel pump for flow rate, its also far quieter, lighter and of a much more compact design to make installation easier.

This units new award winning turbine design produces so much flow rate that it now removes the need for using a twin in-line double fuel pump set-up on high horse-power applications. The innovative design of this pump features a single impeller with two parallel rows of turbine blades on a common shaft (like a jet engine).

These blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's 20% higher than conventional pumps. This is the newer version of the 39/50 DC/SS pump that many people know as the 400LPH pump, however this version is E85 compatible and produces faster flow. All electrical connections must be sealed to be used with E85, therefore this updated version has a built in electrical harness with DELPHI manufactured Packard type connectors and extension loom included.

Please note this is not a vehicle specific pump, therefore it may require modifications to the fuel module, sender wiring, fuel lines. This Is A Motorsport Product And Professional Installation Is Highly Recommended. Opening Hours Monday-Thursday 8.30am to 5.00pm Friday 8.30am to 3.00pm. International customers are most welcome.

The majority of items that we have listed are available from stock and will be dispatched within 24 hours. Some items will be sent direct from our suppliers and may take a little longer but notification will be given on this. (our suppliers may use different couriers) Tracking numbers are held on record and issued at the time of dispatch. Because of the vast range and product types, many parts may appear to be correct and then are not.

Any errors on our part will be rectified by us free of charge. Advanced Automotive is a VAT registered company GB674412729 and a VAT invoice will be provided with your order. International customers who qualify for VAT exemption must submit a current EU VAT number to be exempt from UK VAT. Please enquire before purchasing to ensure you have the correct documentation.